• .

  • .

  • .

  • .

Copyright 2021 - The Laserworld Group

The RTI NANO RGB 50 OPSL has a guaranteed output power of 46'000 mW full-color RGB and an incredible white balance. The benefits include:

  • Very low divergence, thus very good visible even from longer distance
  • New digital amps for the scanners - for increased scan speed and scanning accuracy
  • New: Motorized Color Convergence Alignment available as option
  • 46'000 mW guaranteed output power after optics
  • despite the high power it is possible to reach a maximum scan speed of 45 kpps@8° ILDA.
  • high-precision diode arrays (red, blue) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • green Coherent Taipan OPSL module, which stand out due to beam precision
  • an extremely high output power with a balanced power distribution: 13'000 mW / 637 nm red, 20'000 mW / 530nm green, 20'000 mW / 455 nm blue.
  • new technology for increasing the beam precision of the single-mode diodes
  • brilliant colors and great color fading
  • the RTI NANO RGB 50 OPSL impresses with a very bright 637 nm red and a very bright 455 nm blue
  • emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems
  • Including integrated switchable Double Grating Effect!

The RTI NANO RGB 50 OPSL is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an IDLA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNEt device and this sends the direct control to the RTI NANO RGB 50 OPSL via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.

The RTI NANO RGB 50 OPSL is equipped with laser diode modules and green OPSL module with a very homogenous and balanced setup. The special modules ensure brilliant colors, a homogeneous white and great color mixture. The 637 nm light red sources ensure a very good visibility of the red color spectrum. The high-precision diode arrays emit with very small beam diameters and at the same time have an excellent divergence of less than 1.0 mrad. The beam precision of the single-mode diodes was significantly increased by new methods of beam shaping. The diode laser modules are manufactured by Ray Technologies in Germany.

The green Coherent Taipan OPSL module stand out due to beam precision.

The RTI NANO RGB 50 OPSL is equipped with high-speed scanners, that make the unit perfect for high professional and demanding applications.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO RGB 50 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO RGB 50 OPSL is a quality product manufactured in Germany.

Ray Technologies
Potencia Garantizada Tras Óptica:
50'000 mW
Potencia Rojo:
13'000 mW / 637 nm
Potencia Verde:
20'000 mW / 530 nm (OPSL)
Potencia Azul:
24'000 mW / 455 nm
Clase de Láser:
Especificaciones del Haz (ángulo completo):
aprox. 6.0 mm / < 1.0 mrad
EMS-8000 Digital: 45 kpps ILDA 8°
Ángulo de Escaneo:
max. 60°
Fuente de Láser:
Diodo, OPSL
Modos de Funcionamiento:
ILDA, LAN (Software), DMX, ArtNET, ILDA-Streaming, Autónomo; (integrated intelligent ShowNET laser mainboard with display)
Power cable, Manual, Full Showeditor software license included
Fuente de Alimentación:
85-250 V AC 50/60 Hz
Consumo Eléctrico:
2'800 W
773 x 385 x 205 mm
42 kg

Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 


Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye