• .

  • .

  • .

  • .

Copyright 2020 - The Laserworld Group

The RTI NANO RGB 27 OPSL has a guaranteed output power of 26'000 mW full-color RGB and an incredible white balance. The benefits include:


  • Very small beam diameter -> smaller mirrors -> faster scanning -> ideal for high professional applications
  • Very low divergence, thus very good visible even from longer distance
  • New digital amps for the scanners - for increased scan speed and scanning accuracy
  • New: Motorized Color Convergence Alignment available as option
  • 26'000 mW guaranteed output power after optics
  • despite the high power it is possible to reach a maximum scan speed of 45kpps@8° ILDA. High speed scanner upgrade with CT-6215HP is also available.
  • a low divergence upgrade is available too: with the EMS-9000 scanners, the beam size grows to 10mm, but divergence reduces for perfect long distance projections.
  • high-precision diode arrays (red, blue) provide an excellent beam divergence of less than 1.0 mrad and a low beam diameter. (with the LD-upgrade divergence: <0.5mrad)
  • green Coherent Taipan OPSL module, which stands out due to beam precision and 10'000 mW power
  • an extremely high output power with a balanced power distribution: 8'500 mW / 638 nm red, 10'000 mW / 530 nm green, 5'500 mW / 462 nm cyan, and 5'500 mW / 450 nm blue.
  • new technology for increasing the beam precision of the single-mode diodes
  • brilliant colors and great color fading
  • the RTI NANO RGB 27 OPSL impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • Emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems

Easily connect to the RTI NANO laser with PC, MAC, tablet or mobile phone over LAN and adjust color balance, scanner position and scanning size, safety features and more. Laser configuration made easy - even if the system is mounted and not physically accessible any more.

  • NANO LD - Low Divergence upgrade
  • Scanner upgrade: CT-6215HP (combinable with most other options)
  • Motorized Color Convergence Alignment 
  • RTI GOBO Wheel 
  • Pangolin FB4 

The RTI NANO RGB 27 OPSL is equipped with RTI laser diode modules and a green OPSL module with a very homogenous and balanced setup.The special modules ensure brilliant colors, a homogeneous white and great color mixture. The 638 nm light red sources ensure a very good visibility of the red color spectrum. The high-precision diode arrays emit with very small beam diameters and at the same time have an excellent divergence of less than 1.0 mrad (or even <0.5mrad with the special low divergence optics). The beam precision of the single-mode diodes was significantly increased by new methods of beam shaping. The diode laser modules are manufactured by Ray Technologies in Germany.

The green Coherent Taipan OPSL module stands out due to beam precision and 10'000 mW power.

The RTI NANO RGB 27 OPSL is equipped with high-speed scanners that make the unit perfect for high professional and demanding applications.

By default, the RTI NANO RGB 27 OPSL is controlled via ILDA and is equipped with advanced electronics that provides laser calibration via browser interface. The browser interface works with PC, MAC, Linux, tablet, mobile phone, etc., so the on-site calibration of this laser system is easy and does not require any physical access to the laser after set up any more. It connects via LAN (WIFI is also possible with a suitable access point) and contains calibration options or color balance, scanning position, safety features etc.
Optionally the system can also be supplied with an embedded FB4 (LAN, DMX, SD card operating modes). An external remote control pad is available on request. There is an 'ILDA-IN' interface as well as an 'ILDA-Through' on the back of the device to daisy-chain the control signal. The emergency stop / interlock signal can also be daisy chained for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO RGB 27 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO RGB 27 OPSL is a quality product manufactured in Germany.

Ray Technologies
Potencia Garantizada Tras Óptica:
26'000 mW
Potencia Rojo:
8'500 mW / 638 nm
Potencia Verde:
10'000 mW / 530 nm (OPSL)
Potencia Azul:
5'500 mW / 450 nm
Potencia Cyan:
5'500 mW / 462 nm
Clase de Láser:
Especificaciones del Haz (ángulo completo):
aprox. 5.0 mm / <1.0 mrad
optional: aprox. 10mm / <0.5 mrad (LD optics)
EMS-8000 Digital: 45kpps ILDA 8°
optional EMS-9000 10mm and LD optics: 34kpps ILDA 6°
optional CT-6215HP 6mm: 50kpps ILDA 8°, max. 60°.
Ángulo de Escaneo:
60° max.
Fuente de Láser:
Diodo, OPSL
Modos de Funcionamiento:
ILDA; optional DMX, Auto, LAN, SD-card
Browser interface (integrated), Manual, cable de alimentación; optional: detachable remote control pad
Fuente de Alimentación:
85-250 V AC 50/60 Hz
Consumo Eléctrico:
900 W
550/385/205 mm
32 kg

Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 


Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye